Igo Everywhere 15 Notebook Power Adapter with Igo Dualpower Accessory
From i go


Brand: iGo Model: Igo Everywhere 15 Dimensions: 1.40 pounds

iGo Everywhere15 The iGo system is designed to allow you to charge or power devices with different power requirements using the same charger and to eliminate the need to configure the charger by using quick-connect tips which inherently configure the voltage and current. The iGo everywherepower15 is a power adapter which allows you to charge or power multiple low-powered mobile devices (such as mobile telephones, PDAs, digital cameras and MP3 players) just by changing the tip. The everywherepower15 includes multiple connection cords which will allow you to charge or power the devices in a car, on an airplane or from a wall outlet. It also comes with the iGo dualpower15, so that you can charge or power two devices simultaneously. This iGo device offers the following benefits: Replaces a lost or broken charger Powers devices in various locations (home, office, airports, hotels, cars, airplanes) Powers multiple devices with appropriate tips Powers up to two devices simultaneously No need to manually configure voltage No need for multiple chargers No need for future AC/DC chargers Question: What are the specifications? Answer: The specifications are as follows: Max Output: 15 Watts Input Type: AC adapter, DC adapter AC Input: 100 to 240 VAC, 1.5A, 47/63 Hz DC Input: 11.5 to 30 VDC, 3.0A Max Main Output: 3-10 VDC, 15W Max continuous power Secondary Output: 19 VDC, 15W Max continuous power Standard AC Input Cable: 5' Auto/Air DC Input Cable: 3' Power Output Cable: 3' Power Supply Weight: 6 oz. Power Supply Dimensions: .867" x 3.178" x 2.08" 22.02 x 80.72 x 52.90 mm Included: dualpower15 cable, dual auto/air input cable, standard AC input cable, power output cable, carrying case, user's manual

   

Invisibleshield T-mobile G1
From Invisible Shield

Your search for a T-Mobile G1 case, skin, or cover is now over. ZAGG's invisibleSHIELD is an exceptionally clear and virtually indestructible film that will protect your T-Mobile G1 from unsightly scratches. The exclusive, patented film with nano-memory technology covers and shields your device, keeping it as pristine as the day you took it out of the box.The precision pre-cut invisibleSHIELD applies directly to your T-Mobile G1, providing the toughest, most durable protection you will find. The invisibleSHIELD has its origins in the military, where it was used to protect high-speed helicopter blades from dust, dirt and debris. Now you can use that same powerful technology to protect your T-Mobile G1The invisibleSHIELD is only .2 millimeters thick making it the slimmest skin or cover of its kind. It is so tough that Shieldzone backs it with a lifetime guarantee. So, if it ever does wear or scratch, Shieldzone will replace it for free, for the life of your device. And if you ever need to remove the invisibleSHIELD, no problem; it comes off clean and leaves no sticky residue.
Amazon Sales Rank: #2912 in Cell Phone Accessories Brand: Invisible Shield Model: GOOG1FB Dimensions: .79" h x 4.33" w x 7.48" l, .20 pounds

Quality, but accurate install nearly impossible The material that this shield is made from is indeed super-strong and almost impossible to tear. Also, the pieces are cut with incredible precision. However, that precision comes with a price. A phone like the T-Mobile G1 has lots of curves and cutouts; the sliding screen means it's got more individual pieces to cover. The bits of plastic need to be installed with a jeweler's accuracy, or you'll end up with seams or overlaps. That's just how close the tolerances are. Frankly, if I had three or four sets to practice with, I'm sure I could have nailed it and given this a higher review. But with just one set and one chance to get it right, it's hard to recommend it much higher than I have. I ended up peeling off and discarding everything except the panel covering the screen. It's no coincidence that this is the only rectangular, flat surface on the phone. I feel better, though, with the screen covered. The rest of the case isn't as important. I'm certain that someone who's installed a few of these could do a spectacular job and you'd get an excellent skin. But when you've got one phone and one set of sticky pieces and have never worked with the product before, installing it well is nigh impossible. I realize precision cutting and the glove-accurate fit is the whole point behind the product, but it's just damned hard to work with. Impossible to install correctly I do think this COULD be a good product. I can't stress enough how difficult installation is. I consulted the instructions and watched the videos on uTube. I must admit, I read on several websites that it is hard to put on and thought that it was just the installer's fault. I tend to be good at intricate and detailed work; surely I will do better than them, right? Not so much. I actually installed it on two phones. It does look decent on the front. But the back pieces' corners just don't come together right on either one. My husband took one look at my hard work and told me it looked like I had wrapped the phone in scotch tape. I must admit, he's right. And now the edges on them are already coming up. Unless you have a professional watchmaker's precision and a kindergarten teacher's patience, I would buy the Invisibleshield that is only for the screen. That piece does fit perfectly and gives great protection. Not easy to installed but a MUST for T-Mobile G1 users! I love the product itself but wasn't expecting the back piece to be that difficult. I ended up using all of the solution they supply to install all pieces. To speed up setting of the protective film I used a blow dryer on low high heat all over evenly to dry up as much of the solution as possible being very careful not to leave the dryer in one place very long as melting of the plastic and the phone could take place. When the install was finished there were still exposed portions of the phone due to the film placement. Without the exposed areas installation would be almost impossible. It would eventually snag on something and pull right off. I have to give Zagg kudos to the rubber squeegee that was supplied. I believe that if the normal hard plastic squeegee was used it would be an even harder time to install. This product comes with a Limited Lifetime warranty so worrying about this product is not an issue.

   

Secure Digital MicroSD / Transflash Memory Card with SD Adapter - 1GB for for Palm Centro 690 Smartphone
From Kingston




Waste of spare change. I initially purchased this exclusively for the miniSD adapter, but when it arrived, I realized that it didn't even work on my phone, an HTC Apache. My phone recognized that something was in the expansion slot, but could not access it. My computer, however, did recognize the microSD card when I plugged it into one of my own adapters. I purchased a Sandisk SD Card/Adapter later on, and it worked like a charm. I've never heard of SD cards being specific to a phone, but maybe that was the case here. However, I think if you want a reliable SD card, you should shell out the extra money for the bigger brands, like Sandisk or PNY. The cards themselves are cheap enough already; I wasted my money buying this.

   

Replacement Metal PDA Stylus for Sony Ericsson W950 / M600 by Eforcity, Orange
From Eforcity




nice stylus! I have just bought this stylus and I REALY like it. It is more comfortable and light weight than the previous one I had. The writng is so smooth and very reliable. Highly recommended!

   

Anti-Reflective Screen Protector for Palm Tungsten T5 / TX
From OrionGadgets

Description High quality extra-thick reusable film screen protector for your PDAPackage Includes Screen Protector.Cleaning Cloth. Soft card to get rid of the bubbles. Features 0.25 mm thick high quality PDA protection film. Protects the screen from wear and scratches. Protects your eyes by filtering the ultraviolet rays from screen. Reduced screen glare and reflection make screen more colorful. Easily apply to the screen. Durable, removable, reusable and washable. Anti-static electricity blocks unwanted dust. Compatibility: Palm Tungsten T5 / TX. NOTE: Please apply the screen protector gently in order to avoid too much pressure onto the screen
Brand: OrionGadgers Dimensions: 3.00 pounds

poor The product comes with two protective covers on it that seem to be stuck on with adhesive, so that once you remove the screen protector from its packaging, it has adhesive residue. This leaves the surface tacky, and your stylus doesn't slide on it very well. It also seems to scratch very easily, so you wind up with a rough surface that makes it harder for the palm to recognize the stylus. The only upside to the product seems to be that it is thick, and therefore reduces the chance of damage to the screen. Good product Product as indicated. There's little you need to know about it; it protects the screen! NOT Anti-Reflective I was very disappointed in this product. Nowhere on the item's packaging does it say "Anti-reflective," and it is NOT anti-reflective, although it is billed as such. I contacted the seller and stated that I believed an error had been made in shipping, and they promptly reshipped - the exact same item again. It is a good screen protector, but does not cut down on glare and reflection at all.

Pagelines
Converted by Wordpress To Blogger for WP Blogger Themes. Sponsored by iBlogtoBlog.
preload preload preload